Flies benefit the plant
Posted: Wed Dec 18, 2024 4:38 am
The color and lines of our rollers add to the look of your mower.
Our patented mounting brackets are the exact height of your stock wheels. Tru Cut brand roller brackets do not have the same cutting height and increase the impact of the grass catcher.
Our front rollers contact the grass 2″ in front of the bed blade at exactly the same distance as the Tru cutting wheels. When we designed our Front Roller for Tru Cut Mowers 14 years ago we tested many roller designs and found that in theory it made sense to move the roller closer to the blade, but with the Tru Cut independent rear drive the mower was often front heavy causing the rear tires to spin.
Zero maintenance bearings are not enough, you need heavy duty rubber sealed bearings like you find on all of our front rollers. The “RS” bearings are designed for wet and dusty conditions. “TT” bearing korea email list rollers are designed for indoor conveyor applications.
Even the best bearings after 810 years may need replacement. Our front rollers are designed so you can replace the bearings and still use the same roller. Tru Cut roller bearings are pressed between the roller and the bracket, requiring you to purchase a new roller if a bearing ever fails.
In less than 10 minutes you can install our front roller and it allows you to continue adjusting the height of your lawn mower. Each roller comes with a 100% satisfaction guarantee. If for any reason our product does not exceed your expectations, return the roller and we will give you a full refund.
For those homeowners seeking advice from local vinyl siding contractors, we have compiled this list of dos and don’ts for those who are researching what comes with installing vinyl siding over wood siding. In new construction, it is typically installed over wood wall siding wrapped with insulation and a moisture barrier. In older homes, any old siding (vinyl or metal) must be removed. While we recommend a complete replacement, vinyl siding can be installed over old wood siding, but it requires expert attention to detail, knowledge of decaying wood/mold,
Our patented mounting brackets are the exact height of your stock wheels. Tru Cut brand roller brackets do not have the same cutting height and increase the impact of the grass catcher.
Our front rollers contact the grass 2″ in front of the bed blade at exactly the same distance as the Tru cutting wheels. When we designed our Front Roller for Tru Cut Mowers 14 years ago we tested many roller designs and found that in theory it made sense to move the roller closer to the blade, but with the Tru Cut independent rear drive the mower was often front heavy causing the rear tires to spin.
Zero maintenance bearings are not enough, you need heavy duty rubber sealed bearings like you find on all of our front rollers. The “RS” bearings are designed for wet and dusty conditions. “TT” bearing korea email list rollers are designed for indoor conveyor applications.
Even the best bearings after 810 years may need replacement. Our front rollers are designed so you can replace the bearings and still use the same roller. Tru Cut roller bearings are pressed between the roller and the bracket, requiring you to purchase a new roller if a bearing ever fails.
In less than 10 minutes you can install our front roller and it allows you to continue adjusting the height of your lawn mower. Each roller comes with a 100% satisfaction guarantee. If for any reason our product does not exceed your expectations, return the roller and we will give you a full refund.
For those homeowners seeking advice from local vinyl siding contractors, we have compiled this list of dos and don’ts for those who are researching what comes with installing vinyl siding over wood siding. In new construction, it is typically installed over wood wall siding wrapped with insulation and a moisture barrier. In older homes, any old siding (vinyl or metal) must be removed. While we recommend a complete replacement, vinyl siding can be installed over old wood siding, but it requires expert attention to detail, knowledge of decaying wood/mold,